For all enquiries +44 (0)1803 663012 sales@sea-sea.com
This product is trade only, if you have a trade account please login. If you would like to request trade membership click here.
CONVERTS THE CAMERA'S HOT-SHOE TTL SIGNAL TO TRIGGER STROBES IN DS-TTL AND MANUAL MODES.
The Optical YS Converter mounts inside the housing and connects to the camera's hot-shoe. It converts the camera's electronic TTL signal to a light signal which is transfered to your strobes via *Fiber-Optic Cables.
* SEA&SEA multi-core Fiber-Optic Cable II's must be used with Optical YS Converters.
TTL and Manual modes can be selected by pressing the Mode Switch on the housing.
Advantages of using the Optical YS Converter instead of the camera's built-in flash (or hardwiring via the bulkhead);
- Risk of water-ingress and flooding via the strobe bulkhead is eliminated.
- The camera's battery will last longer.
- External strobes will fire in accordance with their quickest recycle time.
- No inner reflections from camera's built-in flash.
- Compared with slave TTL, the Optical YS Converter achieves far greater accuracy in TTL exposure/output.
- Optical YS Converter is compatible with SLR cameras that do not have a built-in flash.
Controls: Power ON/OFF - TTL mode (blue lamp) / Manual mode (green lamp)
* Remaining battery level is indicated by flashing lamp.
Auto Power Off: The converter will automatically power off if the shutter lever or the mode switch is not activated for more than one hour.
* The converter can be re-activated by pressing the mode switch.
Power Source: 2 x AAA battery (Alkaline: 3.0V / Ni-MH: 2.4V)
Battery Life: Alkaline: 19 hours / Mi-MH: 12 hours (*1 - *2)
Construction: Aluminium alloy (case)
Dimensions (WxHxD): 54.4 x 39.5 x 53.3mm (without cable)
Weight: 154g
YS-D2 / YS-D1 / YS-01 / YS-03 / YS-110a
- CLICK FOR FULL COMPATIBILITY CHART
Check Compatibility Chart for your camera + housing specifics and any relevent notes.
Compatible with MDX-D7100 / MDX-D810 / MDX-D500 / MDX-D850 Housings.
Compatible with MDX-70D / MDX-80D / MDX-5D MkIII v2 (using 5D MkIII cameras) Housings.
Compatible with MDX-7D MkII / MDX-5D MkIII v2 (using 5Ds or 5DsR cameras) / MDX-5D MkIV Housings.
Compatible with RDX-100D Housing.
Compatible with MDX-a7II Housing.
UPDATE: The Optical YS Converter/S1 is compatible with SONY a7ll, a7Rll and a7sRll cameras in compatible MDX-a7ll housings.
Optical YS Converters cannot be fitted to older SEA&SEA housings not designed to incorporate them.
*1 Operating time depends on the battery brand, temperature and frequency of use.
*2 Operating time tested on 750 mAh batteries.
100% Secure Credit Card Payments