This product is trade only, if you have a trade account please login. If you would like to request trade membership click here.

MDX-D810 Housing

THE NEW MDX-D810 UNDERWATER HOUSING HAS NEWLY DESIGNED CONTROLS AND IS COMPATIBLE WITH THE OPTICAL YS CONVERTER.


Product Description

Compatible wit Optical YS Converter/N1.

Compatible with new Optical YS Converter/N1 (#50126) which converts the camera’s TTL signal to a light signal. Both TTL and manual strobe photography are possible using a Fiber-Optic Cable II.

photo

 

Compatible with both the VF180 and VF45 viewfinders

By attaching the VF180 or the VF45 viewfinders (magnification ratio 1.2x) the camera's entire viewfinder can be seen. Recommended for users committed to strict composition and focusing.

 

photo

with VF180 Mounted

photo


with VF45 Mounted

Luminescence Controls

Major controls, including levers and buttons, will glow in dark environments.

photo

Equipped with movable Focus/Zoom gear

When the focus/zoom dial is pulled out, the gear inside the housing will move outward allowing large diameter lenses to be easily mounted.

Main dials equipped with damper spring

The main command dial, the sub command dial, shutter release mode dial and diopter adjustment dial have a damper spring to provide secure operation. (Controls on the cameras will not slip because of the damper).

Three ergonomically improved levers

A new design for the shutter lever, AF mode lever, the AF-ON lever, and the movie-record lever have improved the lever's ergonomic shape

Diopter adjustment dial

The camera's diopter adjustment dial can be operated from the housing.

FEATURES

  • Equipped with two fiber-optic cable sockets.
  • The housing has two accessory ports. One is designed for N-type strobe connector and the other is designed for HDMI output.
  • The port lock is accessible from outside the housing.
  • The camera's lens-lock release button is accessible from outside the housing.
  • The multi-selector has been positioned on the right-hand side of the rear case making it easily accessible while holding the grip and operating the camera.
  • The camera's built-in flash can be activated and deactivated from the housing. (Only when the accessory light-shielding plate is not in use).
  • Equipped with two sacrificial zinc diodes (one on each casing) to avoid electrolysis damage.
  • Three mounting screw holes are located in the bottom of the housing.
  • Equipped with the Optical Viewfinder 0.5x as standard. Optional 0.66x and 0.8x may also be used.
  • Built-in leak sensor immediately alerts you to water ingress.
  • A depth rating of 100m makes the housing ideal for tech diving.

TECH SPECS

Body Construction: Corrosion-resistant aluminium alloy (machined) 
Grips Construction: Corrosion-resistant die-cast aluminium alloy
Depth Rating: 100m
Dimensions (WxHxD): 354x210x141mm
Weight: Approx. 3,200g (Housing only)

ADDITIONAL INFORMATION

The housing is not equipped with a strobe connector when shipped from the factory. Use Fiber-Optic Cables when connecting external strobes. The optional Sync Cord 2-pin Connector is required if you wish to use a conventional hardwired Sync Cable.

SRP: £3167.95
CODE: 06173

Download PDF

Shopping Cart

Your shopping cart is empty

Customer Login

Register

Forgot Password?

Secure Payments

100% Secure Credit Card Payments

Credit Cards