The MDX-5D Mark lll and the MDX-5D Mark lll ver. 2 housings can be converted to accommodate both the EOS 5D Mark lV and the EOS 5D Mark lll (fees apply).
Important controls can be operated whilst holding the grips. Frequently used buttons such as ISO, AF Point Selection and Multi-function Selection buttons are operated by external levers, allowing quick and accurate operations.
AF Start button is locked by pressing and turning the control.
AF Start Lever will remain pressed by pushing the lever forward.
The main command dial, the quick control dial and others have a damper (spring) to secure operation (controls on the camera will not slip because of the damper).
The tension on the Shutter Release lever can be adjusted in 3 steps
The tension on the Shutter Release lever can be adjusted in 3 steps, by changing the location of the spring inside the housing. The distance to half-depress the shutter release can be adjusted in 2 steps, by changing the location of the plastic piece behind the shutter lever, inside the housing.
Compatible with Optical YS Converter/C
Equipped with two fiber-optic cable sockets for optional Optical YS Converter/C.
* Manual option only at launch.
New firmware being developing for Canon EOS 5D Mk lV.
Expected to be available mid to late April 2017.
The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally. The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing.
The camera’s diopter adjustment dial can be operated from outside the housing. This feature is useful when two or more people with different eyesight use the housing.
Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses.
All controls have luminescent stickers which glow in dark conditions.
Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.8x can be used.
Sync Cord 2-pin Connector enables use of conventional hardwired Sync cable (Manual mode only). Accessory port enables use of Leak Sentinel (vacuum sensor).
Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage.
Built-in leak sensor immediately alerts you to water ingress.
Tripod screw mount is located on the centre underside of the housing.
Construction: Corrosion-resistant aluminium alloy (machined, anodized finish)
Grip: Corrosion-resistant die-cast aluminium alloy
Depth Rating: 100m / 330ft
Dimensions (WxHxD): 341 x 198 x 141mm / 13.4 x 7.8 x 5.5 inches
Weight (Approx.): 3,000g / 106oz (Housing only)
O-Ring Set: 62148