SEA&SEA – Products >> Dive Rite technical scuba diving equipment

Dive Rite 3100 Regulator [RG3100]

Retail : £344.95

• Five low pressure ports on the 3100 Regulator gives divers ultimate flexibility in hose routing. This is especially beneficial to the backmount technical diver where the need for a streamlined reg configuration can cause undue stress on the hoses.
• Our 5th LP port is located on the top of the turret and we designed it with safety and convenience in mind. The port is slightly convex and slotted on each side to accommodate an 11/16 wrench for securing the turret while loosening the LP hose. This makes it easy to change the hose without concern of loosening the turret. 
• The 3100 Series Regulator is the same high-performance, workhorse reg as the former 3000. Designed for the challenging world of technical diving, this reg is certified to CE EN 250 and approved for cold water 300 bar service, having passed the most rigorous of tests.
• A pneumatically balanced design delivers gas at a constant pressure so work of breathing remains effortless independent of depth or tank pressure.
• A diaphragm first stage means regulator parts are not exposed to the environment, protecting it from contaminates and debris.
• An ergonomic venturi lever is easy to adjust even with thick gloves.An optional environmental kit protects the reg in cold weather and harsh environments. It comes standard with a 300-bar DIN connector and an additional yoke adapter.
• Using oxygen compatible materials and assembly processes that are today industry standard, the 3001 is suitable for oxygen use at gas pressures up to 3000 psi.
• CAUTION: The 3100 Regulator is suitable for oxygen use only if precautions are taken. Diver must use oxygen compatible materials, keep the regulator clean from contaminants during assembly and use and open the tank valve slowly each time the regulator is pressurized. These are normal operating instructions and safety precautions for any equipment used with oxygen mixtures above 40%. Please refer to your agency training guidelines for additional information on how to safely dive oxygen mixtures above 40%.
• Note: The 3100 Regulator comes with Dive Rite's standard limited lifetime warranty and free service kits for life through an authorized Dive Rite dealer as long as the regulator is serviced every two years or one hundred dives.

Balanced Octopus [RG2015]

Retail : £134.95

The tried and true RG2015 is a workhorse regulator and has performed admirably over the years. Pneumatically balanced, it is now our secondary octo of choice, making the entire Dive Rite line of regulators balanced for top performance regardless of depth or tank pressure. An adjustable Venturi lever and inhalation resistance knob allows the diver to fine tune inhalation effort and breathing resistance based on dive conditions or diver preference. CE EN250 approved

Stage Regulator Package [RG3000STAGE]

Retail : £399.95

The Stage/Deco Reg is our 3000 series complete with a 40-inch hose, compact pressure gauge, additional blue and yellow face plates, bolt snap and hose clip retainer. Our 3000 series regulator is a high performance, workhorse regulator designed for the rigors of advanced diving. It takes all the abuse of a typical stage bottle and can even be serviced easily in the field. Using oxygen compatible materials and assembly processes that are today industry standard, our Stage/Deco Regulator is suitable for oxygen use at gas pressures up to 3000 psi. **Having CE approval to EN 250, the 3000 has earned the distinction of having superb breathing, while withstanding the hardships and abuse of working divers. Pneumatically balanced design delivers gasat a constant pressure so work of breathing remains effortless independent of depth or tank pressure. Diaphragm first stage eliminates the number of moving parts and keeps internal parts free of outside contaminates and debris. Ergonomic, venturi lever is easy to adjust even with thick gloves or cold-water mitts.

The 3000 has an optional cold-water environmental kit that also protects the regulator from build up of salt, sand, or other contaminants. Comes standard with a 300-bar DIN connector. CE EN250 approved. ** CAUTION: The RG3000-STAGE Regulator is suitable for oxygen use only if precautions are taken. Diver must use oxygen compatible materials, keep the regulator clean from contaminants during assembly and use and open the tank valve slowly each time the regulator is pressurized. These are normal operating instructions and safety precautions for any equipment used with oxygen mixtures above 40%. Please refer to your agency training guidelines for additional information on how to safely dive oxygen mixtures above 40%. The Stage/Deco Reg comes with Dive Rite's standard limited lifetime warranty and free service kits for life through an authorized Dive Rite dealer as long as the regulator is serviced every two years or one hundred dives.

DIN 1st Stage Cap [RG1222]

Retail : £2.95

Plastic

DIN Tank Valve Plug [RG1223]

Retail : £2.95

Plastic

Dive Rite Octo Strap [AC2086]

Retail : £4.95

The low profile sliding bolt snap helps keep overall dangle to a minium.

The simple, rugged & reliable octopus retainer keeps 2nd stages securely in place when not needed, yet releases them quickly in response to a firm tug.

Octoguard Large [DR2008-1]

Retail : £9.95

Large enough to go round neck.

Octoguard Mini [DR2009-1]

Retail : £7.95

Complete with split ring for attaching to BCD’s

Second Stage Shield [RG2785]

Retail : £5.95

When not in use, the elastic strap blocks the regulator mouthpiece, thus were you to place this reg in your mouth by accident you would instantly know that something was wrong.

To deploy the mouthpiece at a safe depth, simply use the d-ring to pull the strap back & out of the way.