SEA&SEA – Products >> Dive Rite technical scuba diving equipment

Dive Rite Nitek Q Computer - Trimix [CO8000-Trimix]

Retail : £949.95

The NiTek Q Trimix computer is already unlocked for Trimix diving. It comes standard as a seven gas Trimix computer with a digital compass and custom gradient factor option. If desired, the NiTek Q Trimix computer can be upgraded to CCR mode with fixed PO2 set points.Using the well established Buhlman ZLH16 algorithm along with a default gradient factor of 30/75, the NiTek Q Trimix Computer has three pre-set GF settings to choose from that allow for deep stops or shallow stops, plus a custom gradient factor for those divers trained in custom gradients.

Beautifully housed in an ironclad, mil-spec aluminum case with mineral glass viewing port and a dazzling yellow OLED display, the NiTek Q Trimix is a wrist-mounted computer that carries the tiniest of footprints, yet boldly displays dive data upon a huge screen. Intuitive, push button navigation makes programming and diving the NiTek Q unintimidating.

• Standard 7-gas Trimix (8%-99% O2, 0-92% He)
• Optional CCR mode with fixed PO2 set-points
• Buhlman ZLH16 algorithm with three preset gradient factors of 30/75, 40/100 or 75/95
• Visual alarms
• Pre-dive planner gives NDL for selected gases
• Dive logging Imperial/Metric settings
• Lithium polymer 3.7V rechargeable battery
• Hardware Specs
• Yellow OLED Display Large, 24-point font Visible in complete darkness
• Scratch-resistant mineral glass
• User-chargeable lithium polymer battery
• Rated to a depth of 150m (492 ft)
• Dimensions: 3.5 x 2.3 x 1 in (8.9 x 5.7 x 2.5 cm)
• CE certification pending (EN13319, EN 61000)
• Includes Self donning ladder lock wrist strap
• USB Cable
• 120V US AC charger
• Optional Accessories
• Carrying bag(available now)
• Bungee wrist mount
• Screen protector
• Replacement USB cap/o-ring service kit
• Replacement push button kit

Dive Rite Nitek Q4 Computer [CO8400]

Retail : £1299.95

The NiTek Q4 interfaces with your rebreather's O2 sensor and monitors the loop PO2.

It comes fully unlocked with Full Trimix and Custom Gradient Factors with an optional Digital Compass.

A hardware I/O port connects to the rebreather O2 sensor via a Fischer connector data cable, which is available separately.

Wrist-mounted, the NiTek Q4 is carries the tiniest of footprints, which is an added benefit for gear-laden rebreather divers. Better yet, the viewing screen takes up the entire footprint which means you get a large, easily readible display that is also dazzling bright, yellow OLED. Housed in an ironclad, mil-spec aluminum case with mineral glass viewing port, the NiTek Q4 is designed for the abuses of technical diving.Intuitive, push button naviation allows you to focus on your rebreather and makes programming the NiTek Q4 a breeze. The NiTek Q4 uses the Buhlman ZLH16 algorithm along with a default gradient factor of 30/75. It has three pre-set GF settings to choose from that allow for deep stops or shallow stops, plus a custom gradient factor setting.

• Standard 7-gas hypoxic Trimix (8%-99% O2, 0-92% He)
• Standard custom gradient factors
• Optional digital compass
• Standard closed circuit mode with external PO2 monitoring
• Buhlman ZLH16 algorithm with three preset gradient factors of 30/75, 40/100 or 75/95
• Visual alarms
• Pre-dive planner gives NDL for selected gases
• Dive logging
• Imperial/Metric settings
• Lithium polymer 3.7V rechargeable battery
• Hardware Specs
• Yellow OLED Display Large, 24-point font Visible in complete darkness
• Scratch-resistant mineral glass
• User-chargeable lithium polymer battery
• Rated to a depth of 150m (492 ft)
• Dimensions: 3.5 x 2.3 x 1 in (8.9 x 5.7 x 2.5 cm)
• CE certification pending (EN13319, EN 61000)
• Includes Self donning ladder lock wrist strap
• USB Cable
• 120V US AC charger
• Optional Accessories
• Carrying bag (available now)
• Fischer connector data cable (available now)
• Bungee wrist mount
• Screen protector
• Replacement USB cap/o-ring service kit
• Replacement push button kit